Chemical Resistant Laboratory Flooring
At Raleigh Epoxy Flooring Pros, we install flooring systems built for labs, not just for looks. Research Triangle Park sits close by and holds over 800 biotech and life sciences companies inside more than 10.6 million square feet of lab, office, and manufacturing space.
That means a lot of local facilities managers are dealing with the same problem: standard concrete floors don't hold up against the reagents, solvents, and daily wash downs that lab work requires. We build floors that do.
Why Standard Flooring Fails in a Lab Environment
Bare or sealed concrete is porous. Acids etch it. Solvents soak into it. Over time, moisture gets trapped underneath and the slab starts to break down from the inside. In a pharmaceutical or diagnostic lab, that's not a cosmetic issue, it's a contamination risk and a compliance problem.
Regulatory bodies like the FDA and USP expect surfaces that can be cleaned, disinfected, and inspected without breaking down. A cracked or stained floor doesn't pass that test.
We use multi layer epoxy and novolac resin systems, sometimes combined with MMA (methyl methacrylate) topcoats for facilities that need fast cure times between shifts.
Novolac epoxy in particular handles a wider range of acids and solvents than standard epoxy, which matters in histology labs, chemical storage rooms, and anywhere concentrated reagents get handled daily.
Get Free In-House Estimate
asterisk ( * ) are required
| Lab Type | Common Exposure | Recommended System |
|---|---|---|
| Chemistry / R&D Lab | Solvents, acids, bases | Novolac epoxy, 1/8 inch |
| Histology / Pathology Lab | Xylene, formalin, alcohol | MMA topcoat over epoxy base |
| Diagnostic / Clinical Lab | Bleach, disinfectants, blood | Seamless epoxy, integral cove base |
| Pharma Manufacturing | Cleanroom protocols, wash down | Epoxy with anti microbial additive |
We work with resin systems from Sherwin-Williams, Sika, and Dur-A-Flex, along with Stonhard’s urethane mortar line for labs that need extra impact resistance around equipment bays. Each brand has strengths in different chemical categories, so we match the resin to what’s actually spilled on that floor, not a one size fits all product.
What You Get With Our Lab Flooring Installations
- Seamless surface with no grout lines for bacteria or chemicals to collect in
- Integral cove base that curves up the wall instead of meeting it at a hard 90 degree joint
- Slip resistant texture options that still meet clean room standards
- Static control additives available for labs running sensitive electronics
- Color coded zones for spill containment areas or traffic paths
The global epoxy resin market was valued at $13.9 billion in 2023 and is projected to reach $21.5 billion by 2030. Demand from industrial and lab construction is a real driver of that number, and we're seeing it locally as more life sciences companies expand into the Triangle.
Facilities managers are asking for chemical resistant systems earlier in the build process now, not as an afterthought once a floor has already failed.
If you're planning a new lab build out or dealing with a floor that's already showing acid etching or delamination, reach out.
We'll walk the space, ask what chemicals are actually in use day to day, and recommend a system sized to that reality rather than a generic spec sheet.